Leather Information

Tandy Leather Buying Guide
The Silhouette Curio New Possibilities With Leather and Faux Bone

LEATHER THICKNESS CHART

CAMEO AND PORTRAIT - leather thickness needs to be under 2mm. 1- 4 oz. CURIO PLATFORMS
1 to 2 oz – 6 platforms
3 to 4 oz – 5 platforms ** Use this weight Tooling Leather on Curio
5-7 oz – 4 platforms

LEATHER USER DEFINED SETTINGS CURIO

The actual (not virtual) platform setting is 5 layers – tools one rubber band support
Leather 3/4 oz.cut~ tool ratchet blade 8/platform 6/spd 5/ Th 33/dbl cut
Leather 3/4 oz.chomas etcher~ tool sketch/platform 6/spd 5/Th 25/single cut
Leather 3/4 oz.chomas blunt etcher~ tool sketch/platform 6/spd 5/Th 15/single cut
Leather liningtool Ratchet 10/platform 6/spd 8/Th 33/ double cut

LEATHER USER DEFINED SETTINGS PORTRAIT

LeatherBlade 2 rubber band supports
Leather 3/4 oz.cut~ tool ratchet blade 8/spd 5/Th 25/dbl cut
Leather 3/4 oz.chomas etcher~ tool sketch/spd 5/Th 15/20/25/single cut
Leather 3/4 oz.chomas blunt etcher~ tool sketch /spd 6/Th 15/single cut

Hewits Analine Dye For Leather
Hewits Aniline Dyes are specially selected for the staining of Vegetable Tanned Leathers. A range of ten colors has been
carefully chosen from which we consider it is possible to match the majority of possible colors. Variations of
shades can be obtained by adding small quantities of a contrasting color to the basic shade. The intensity of
the color can be determined by the strength of the solution used. It is inadvisable to endeavor to make too great a change, rather start again with a different base shade.

To prepare a solution from the powder, a small quantity should be made into a paste with cold water,
then boiling water added until the required dilution is obtained. If the solution is too concentrated,
a "Bronze" effect will result. Please note that the current lot is in paste consistency. We have been informed by
J. Hewit that the dyes will preform the same in powder or paste form.

As a rough approximation, 1/3 of 50ml of a the dye powder will make 500ml (1 pint) of liquid dye.

Once completely dry, an application of Hewits Dye Fix will fasten the dye. Containers are each 50ml.

Hewits Dye-Fix is a specially formulated fixative for our Hewit's Aniline Leather dyes. Once dyeing has been carried out and allowed to dry, simply apply a coating with cotton wool or a lint-free cloth to the leather. Once dry, the leather can be finished in the normal way. Sold in 150ml (5 fl.oz) bottles.