Faux Bone 2 mm - 5 layers |
Tools use one rubber band support |
Faux Bone 3mm - 4 layers |
Tools use one rubber band support |
Etch Faux Bone 2 mm | Chomas ~tool Etching/platform 6/spd 5/ Th 33/double cut |
Etch Faux Bone 2 mm | stipple ~ tool Etching/platform 5/spd 5/Th 15/double cut |
Etch Faux Bone 3 mm | Chomas ~tool Etching/platform 5/spd 5/Th 33/double cut |
Etch Faux Bone 3 mm | stipple ~ tool Etching/platform 4/spd 5/Th 15/double cut |
Cut Leather 3/4 oz. | cut~ tool ratchet blade 8/platform 6/speed 5/ Thickness 33/double cut |
Tool Sharp Leather 3/4 oz. | chomas etcher~ tool sketch/platform 6/speed 5/Thickness 25/single cut |
Tool Blunt Leather 3/4 oz. | chomas blunt etcher~ tool sketch/platform 6/speed 5/Thickness 15/single cut |
Cut Leather lining | tool Ratchet 10/platform 6/speed 8/Thickness 33/ double cut |
Leather | Blade 2 rubber band supports |
Cut Leather 3/4 oz. | cut~ tool ratchet blade 8/spd 5/Th 25/double cut |
Tool XSharp Leather 3/4 oz.??? | chomas etcher~xtra sharp tool sketch/spd 5/Th 15/20/25/single cut |
Tool Sharp Leather 3/4 oz. | chomas etcher~ tool sketch/spd 5/Th 15/20/25/single cut |
Tool Blunt Leather 3/4 oz. | chomas blunt etcher~ tool sketch /spd 6/Th 15/single cut |
Leather | Silhouette School Blog Cut Leather With Silhouette Cameo |
Cut Leather Lambskin | cut~ tool ratchet blade 10/spd 3/Th 33/double cut/double cut/maybe another double cut |
Move the black rubber rings on main roller shaft as far to sides of shaft as possible. | Do a test sample on scrap clay before starting your project. |
Position the clay on the BACK of the Silhouette Light Hold Cutting Mat |
Polymer Clay 2 cards | Blade 2 Speed 8 and Thickness 2 single cut |
Use DEEP CUT BLADE at the #20 setting. Remove the red cap for maximum blade depth and ease of cleaning. |
Cameo maximum cut settings = 1.0mm = Medium Thin
setting on chart. Regular blade can cut up to 1.5mm = Medium on Curio |
Deep Cut blade can cut up to 2.1mm = Medium Thick on Curio |
Settings for platforms, speed, and thickness are a starting point. |
The goal is to have the cut just barely cut the freezer paper - if at all. |
Platforms = 1 Speed = 4 Thickness =14 |